Sony DVS-9000SF - Page 92

Chapter 11 DME Operations
92
DME Special Effect Operations
a) For 4:3
b) For 16:9
c) There are some nonlinear effects for which Angle cannot be used.
Bar shape parameters
Setting the color of the light in the highlight area
To set the color of the light in the highlight area, use the following procedure.
1 Turn [Light Color] on.
2 Adjust the following parameters.
Setting the bar shape of the shade area
When you select [Preset] in step 3 (see page 90) of the procedure “Applying
the Lighting effect”, use the following procedure to set the bar shape of the
shade area.
1 Turn [Shade Modify] on.
2 Adjust the following parameters.
2 Y Y-value of bar center point
–3.00 to +3.00
a)
–2.25 to +2.25
b)
3
Angle
c)
Angle of bar –8.00 to +8.00
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
Center point of bar
Bar width
Bar angle
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00