Sony DVS-9000SF - Page 80

Chapter 11 DME Operations
80
DME Special Effect Operations
To set the position of the border between original and reflection
Use the following procedure.
1 Press [Position].
2 Set the following parameters.
Multi Mirror settings
The Multi Mirror effect divides the image into originals and reflections, lining
them up vertically and horizontally.
To apply the Multi Mirror effect
With the Multi Mirror menu displayed, set the following parameters.
To set the center position of original image
Use the following procedure.
1 Press [Position], turning it on.
2 Set the following parameters.
Kaleidoscope settings
The Kaleidoscope effect creates an image like a view into a kaleidoscope.
Knob Parameter Adjustment Setting values
1 H Horizontal border position
–8.000 to +8.000
2 V Vertical border position –6.000 to +6.000
Knob Parameter Adjustment Setting values
1 Interval H Horizontal distance between
mirrors (original width)
0.000 to 10.000
2 Offset H Amount of horizontal offset of
image with mirrors fixed
–4.000 to +4.000
3 Interval V Vertical distance between mirrors
(original width)
0.000 to 10.000
4 Offset V Amount of vertical offset of image
with mirrors fixed
–4.000 to +4.000
5 Angle Mirror angle –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal original image center
position
–4.000 to +4.000
2 V Vertical original image center
position
–4.000 to +4.000