Sony DVS-9000SF - Page 78

Chapter 11 DME Operations
78
DME Special Effect Operations
To apply the Split effect
With the Split menu displayed, use the following procedure.
1 In the <Mode> group, select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
2 Set the following parameters.
To set the split position
Use the following procedure.
1 Press [Position].
2 Set the following parameters.
Split Slide settings
The Split Slide effect divides the image into bars which slide alternately in
reverse directions.
To apply the Split Slide effect
With the Split Slide menu displayed, set the following parameters.
Knob Parameter Adjustment Setting values
1 Transition H Degree of left and right separation 0.000 to 100.000
2 Transition V Degree of top and bottom
separation
0.000 to 100.000
Knob Parameter Adjustment Setting values
1 H Degree of left and right
separation
–4.000 to +4.000
2 V Degree of top and bottom
separation
–3.000 to +3.000
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 Transition H Degree of transition in horizontal
direction
0.000 to 100.000
2 Random H Degree of randomness in distance
moved by blocks in horizontal
direction
0.00 to 100.00
3 Skew H Degree of skew in horizontal direction 0.00 to 100.00
4 Width H Horizontal width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000