163Recalling a Register
Chapter 13 Keyframe Effects
E: The selected register is empty for all currently selectable regions.
4
To apply a temporary attribute (effect dissolve), press the [+/–/EFF DISS]
button.
Note
It is not possible to apply temporary attributes to the master timeline.
5
Press the [ENTER] button.
This recalls the specified register.
When the master timeline is recalled, the region selection buttons light
according to the saved region information.
To undo the recall of a register
Immediately after recalling the register, press the [UNDO] button to undo the
operation.
Note
After recalling the master timeline, you cannot undo the recall.
To Next Page
Loading...
