195Creating and Saving a Master Timeline
Chapter 13 Keyframe Effects
• To select all regions, press [ALL].
To select all switcher-related regions (M/E, P/P, USER), press [SWR
ALL].
4
Press [Assign], turning it on.
• If the selected register is locked, a confirmation message appears asking
whether or not to cancel the operation. Press [OK] to return to the
previous menu display without carrying out the registration.
• If the operation is carried out, the region selected in step 3 is registered
on the master timeline, and the parameters are now valid.
5
Turn the knob to select the number of the effect register.
6
Repeat steps 3 to 5 as required to set all regions and register numbers to be
saved on the master timeline.
7
In the <Store> group, press [Store].
This saves the settings.
To return to the state before saving the master timeline content
In the <Store> group, press [Undo].
Knob Parameter Adjustment Setting values
3 Effect Reg Effect register number 1 to 99
To Next Page
Loading...
