201Register Operations in the Menus
Chapter 13 Keyframe Effects
• To select all registers, press [ALL].
5
Press [Delete].
Attaching a name to an effect register
Use the following procedure.
1
In the Effect menu, press VF2 ‘Effect 1-99’ and HF7 ‘Rename.’
The Rename menu appears.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of the list.
4
Using any of the following methods, select the register you want to name.
• Press directly on the list in status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The selected register appears in reverse video.
5
Press [Rename].
A keyboard window appears.
For details of keyboard window operation, see “Menu Operations” in
Chapter 2 (Volume 1).
6
Enter the name, of not more than eight characters, and press [Enter].
The set name is reflected in the status area.
Knob Parameter Adjustment Setting values
1 Register Register number 1 to 99
3 Num Select number of registers 1 to 99
Knob Parameter Adjustment Setting values
1 Register Register number 1 to 99
To Next Page
Loading...
