Chapter 16 Engineering Setup
246
Setup for the Whole System
2
Press the [Set Date/Time] button.
This sets the current time to the date and time set in step 1, and the setting
in the “Current” box of the status area changes accordingly.
Formatting a memory card
To format a memory card, use the following procedure.
Note
Format a memory card before using it for the first time.
1
Insert the memory card in the memory card slot.
2
In the System>Maintenance menu, using any of the following methods,
select the USB device.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
3
In the <USB Storage Device> group, press [Format].
A confirmation message appears.
4
To carry out the formatting, press [OK].
This formats the memory card.
Carrying out the primary setting
To specify a USB device with a storage device connected as a primary device,
use the following procedure.
Note
Without this setting, you cannot use the “Memory Card” item in the File menu
to access a memory card on a storage device connected to the USB device.
1
In the System>Maintenance menu, using any of the following methods,
select the USB device you want to set as primary.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
To Next Page
Loading...
