Sony DVS-9000SF - Page 269

269Setup Relating to Operations From the Control Panel
Chapter 16 Engineering Setup
AUX1 ST
|
AUX48 ST
AUX1 output safe title on/off
|
AUX48 output safe title on/off
On Off
FM Src1 Frame
Freeze
Frame freeze of frame memory source
1
During frame
freeze
Either of the other
two states
FM Src1 Filed Freeze Field freeze of frame memory source 1 During field
freeze
Either of the other
two states
FM Src1 Freeze Off Release freeze of frame memory
source 1
While freeze
being released
Either of the other
two states
FM Src2 Frame
Freeze
Frame freeze of frame memory source
2
During frame
freeze
Either of the other
two states
FM Src2 Field Freeze Field freeze of frame memory source 2 During field
freeze
Either of the other
two states
FM Src2 Freeze Off Release freeze of frame memory
source 2
While freeze
being released
Either of the other
two states
SWR GPI Enbl Enable/disable switcher GPI Enabled Disabled
DME1 GPI Enbl Enable/disable DME1 GPI Enabled Disabled
DME2 GPI Enbl Enable/disable DME2 GPI Enabled Disabled
Panel GPI Enbl Enable/disable panel GPI Enabled Disabled
SWR GPI1 Test Fire
|
SWR GPI8 Test Fire
Output test trigger from switcher GPI1
|
Output test trigger from switcher GPI8
Output (lights
only at the instant
the button is
pressed)
When the output
is assigned
DCU GPI1 Test Fire
|
DCU GPI50 Test Fire
Output test trigger from port assigned
to DCU GPI1
|
Output test trigger from port assigned
to DCU GPI50
Output (lights
only at the instant
the button is
pressed)
When the output
is assigned
Macro Attachment
Enbl
Enable/disable macro attachment Enabled Disabled
Macro Only Set Macro only mode on/off On Off
Pre Macro Set macro attachment in pre macro
mode
Can be set only
while pressed (lit)
When the function
is assigned
Post Macro Set macro attachment in post macro
mode
Can be set only
while pressed (lit)
When the function
is assigned
Macro Take Macro execution During execution When the function
is assigned
Macro Auto Ins Macro auto insert mode on/off On Off
Macro AT with Rate When registering an auto transition
macro event, on/off setting of mode to
save transition rate
On Off
Command name
a)
Function Button status
Lit amber Off