Sony DVS-9000SF - Page 36

Chapter 11 DME Operations
36
DME Special Effect Operations
Radial Gradation and Radial Rainbow parameters
Rainbow Gradation parameters
The valid ranges of the parameter values depend on the aspect ratio (4:3/
16:9) selected in the system, as follows.
•4:3 mode
• 16:9 mode
3 When Gradation Matte or Rainbow Matte is selected, set modifiers as
required.
• When turning [Angle] on in the <Rotation> group and slanting the
pattern
a) –1.00 is one rotation in counterclockwise direction.+1.00 is one rotation in clockwise
direction. 0.00 is no rotation.
3 Soft Softness of gradation border
region
0.00 to 100.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
3 Soft Softness of gradation border
region
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Position of gradation border in
horizontal direction
–8.00 to +8.00
2 V Position of gradation border in
vertical direction
–6.00 to +6.00
3 RBW Soft Softness of rainbow border region 0.00 to 100.00
4 GRD Soft Softness of gradation border
region
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Position of gradation border in
horizontal direction
–8.00 to +8.00
2 V Position of gradation border in
vertical direction
–4.50 to +4.50
3 RBW Soft Softness of rainbow border region 0.00 to 100.00
4 GRD Soft Softness of gradation border
region
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Angle Rotation angle of pattern
–8.00 to +8.00
a)