Sony DVS-9000SF - Page 380

Chapter 18 Macros
380
Macro Operations in the Numeric Keypad Control Block and the Keyframe Control Block
4 Move to the edit point which is the destination within the macro to which
you want to move the events.
5 To paste the contents of the paste buffer after the edit point, press the
[PASTE] button in the keyframe control block.
To paste before the edit point, hold down the [SHIFT] button in the
keyframe control block and press the [PASTE] button.
This pastes the events from the paste buffer.
Copying events
Use the following procedure.
1 Specify the edit point for the start of the range to be copied.
2 To copy multiple events simultaneously, press the [FROM TO] button in
the keyframe control block, then specify the range in the numeric keypad
control block.
3 Press the [COPY] button.
This copies the specified events into the paste buffer.
4 Move to the edit point which is the destination within the macro to which
you want to copy the events.
5 To paste the contents of the paste buffer after the edit point, press the
[PASTE] button in the keyframe control block.
To paste before the edit point, hold down the [SHIFT] button in the
keyframe control block and press the [PASTE] button.
This copies the events from the paste buffer.
Inserting a pause event
Use the following procedure.
1 Press the [PAUSE] button in the keyframe control block, lighting it green.
The indication “PAUSE” appears in the numeric keypad control block
display.