Sony DVS-9000SF - Page 452

Appendix
452
Error Messages
Internal
Error:
Data HDD
The user data partition of hard
disk drive is damaged, and all
data is lost. The hard disk drive
needs to be reformatted.
Please execute HDD format on
Page 7317.
When starting up the menu system, an error
was found on the hard disk.
In the 7317: Engineering Setup>System>
Maintenance menu, execute [HDD Format].
Internal
Error:
HDD is
incorrect
Hard disk is incorrect or not
formatted.
To format the hard disk, please
execute “HDD Format” on Page
7317.
Internal
Error:
Temporary
HDD
The system data partition of
hard disk drive is damaged.
The hard disk drive needs to be
reformatted. Please execute
HDD format on Page 7317.
Please make sure to save all
data in the user data partition
of hard disk drive to any other
device or media, before
reformatted.
Invalid
Name
Empty... 2121: Frame Memory>Edit>Freeze>Store
In the above menu, a Store was carried out
without specifying a name.
Alternatively:
71XX: File menu
7171: File>Configure>Directory
In the above menu, when renaming a file or
creating a directory, the name was not entered.
Enter the name correctly.
The file exists already... 2121: Frame Memory>Edit>Freeze>Store
In the above menu, the file name specified for a
store operation already exists in the switcher.
Specify a different name.
Set Time/
Date
Error: Wrong Format. 7317: Engineering Setup>System>
Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
Warning No Switcher information
available.
Please confirm “Network
Configuration” on Page 7311.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311: Engineering Setup>System>
Network Config menu, retry [Auto Config].
Warning This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
6211.1: Effect>Master Timeline>Store>Edit
6311.1: Snapshot>Master Snapshot>Store>
Edit
6411.1: Shotbox>Register>Store>Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
Icon Title Message Description