Appendix
456
Error Messages
a) If there is no response at all from the processor on the Data LAN, this message appears. Check
the Network Config, Data-LAN connections, and processor power supply.
b) This appears if the memory card cannot be accessed normally.
Check whether the memory card is damaged, whether it is correctly connected to the memory
card slot, and whether the USB Primary settings are correct.
c) This appears if there is insufficient free space on the memory card or hard disk.
d) This appears if an attempt is made to transfer a frame memory file whereas another file with the
same name already exists on the switcher. Change the name, or delete the file on the switcher,
then repeat the transfer.
ERROR: COMMAND RESULT
ERROR: VERIFY ERROR
b)
ERROR: NO FREE SPACE
c)
ERROR: SAME FILE ALREADY EXIST
d)
Message
To Next Page
Loading...
