Sony DVS-9000SF - Page 66

Chapter 11 DME Operations
66
DME Special Effect Operations
a) Set when Lock is on.
b) Set when Lock is off.
• When Size is selected
a) Set when Lock is on.
b) Set when Lock is off.
To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
3
Offset V
a)
Vertical direction in which to offset
wave phase and amount of
movement
–16.00 to +16.00
4
Speed V
b)
Vertical direction and speed of
waves
–100.00 to +100.00
5 Slant Slant of waves –8.000 to +8.000
Parameter group [2/2]
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Amp H Amplitude of waves 0.00 to 100.00
2 Freq H Frequency of waves 0.00 to 100.00
3
Offset H
a)
Direction in which to offset wave
phase and amount of movement
–16.00 to +16.00
4
Speed H
b)
Direction and speed of waves –100.00 to +100.00
5 Slant Slant of waves –8.00 to +8.00
Offset
Amp