87DME Special Effect Operations
Chapter 11 DME Operations
2
Set the following parameters.
Swirl settings
The Swirl effect swirls the image.
To apply the Swirl effect
With the Swirl menu displayed, set the following parameters.
To make the tip of the swirl stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the center position of the swirl
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 H Center point in horizontal
direction
–5.000 to +5.000
2 V Center point in vertical direction –4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Transition Swirl amount 0.00 to 100.00
2 Center Amount of rotation in center of swirl –8.000 to +8.000
3 Outer Amount of rotation outside of Area –8.000 to +8.000
4 Area Region of swirl 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Horizontal center position of swirl –8.000 to +8.000
2 V Vertical center position of swirl –6.000 to +6.000
To Next Page
Loading...
