89DME Special Effect Operations
Chapter 11 DME Operations
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
Character Trail settings
The Character Trail effect extends the edge of the image like a trail.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
To make the tip of the swirl stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Degree to which pixel positions
become more randomized
further from the center
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Transition Position where effect starts –8.000 to +8.000
2 Expand Degree of expansion 0.00 to 100.00
3 Trans Angle Angle of slanting in effect region –8.000 to +8.000
4 Trail Angle Direction of trail –100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Density Degree to which image disappears 0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00
To Next Page
Loading...
