system for the maximum permissible service
life (replacement state of wear).
Once the last numbered seal has been used,
the entire system must be replaced.
Two-person cab
Industrial trucks that feature a cab that permits
two operators must also be equipped with two
abseil systems.
In such trucks, it must be ensured that only
the lifting points approved by the manufacturer
are used.
Different operators
If an industrial truck is used by multiple per-
sons, e.g. in multi-shift use, it may be indica-
ted that several preset abseil systems must be
kept on hand. This is particularly sensible if
the different operators are of widely varying
heights and/or weights and the safety harness
would therefore have to be adjusted to a sig-
nificant degree.
In such trucks, it must be ensured that only
the lifting points approved by the manufacturer
are used.
Operation
4
Emergency operation
935231 804 2502 EN - 04/2020
To Next Page
Loading...
