Special safety information
about load pick up
Recognising danger is half the battle!
●
Before every load pick up, make sure that
the load to be picked up does not exceed
the load capacity of the truck (refer to the
load capacity diagram) or the maximum
permissible dimensions as specified on the
datasheet. This also includes, of course, the
accumulated weight of the picked goods
●
Loads that are to be transported and stored
must be packed securely
●
The centre of gravity of the load must not
change during acceleration, braking or dur-
ing transport
●
No parts must be allowed to fall
●
If loads cannot be transported with the nec-
essary level of safety, an appropriate con-
tainer or means of securing the load must
be employed to ensure safety
●
Loads must always be transported in suita-
ble containers or secure packaging
●
Loads comprising loose packages may not
be stacked higher than the top edge of the
cab rail
●
If very high loads that block the view of the
roadway have to be transported, appropri-
ate safety measures must be put in place; if
necessary, a guide and traffic supervisor
must be used
●
Hanging or swinging loads must not be at-
tached to and transported on the lifting ac-
cessories
Safety
2
Special safety information about load pick up
14 5231 804 2502 EN - 04/2020
To Next Page
Loading...
