may be necessary for another test to be car-
ried out.
The operating company is responsible for
checking whether the country in which this in-
dustrial truck is used requires regular safety
checks to be carried out on the industrial truck
by a specialist.
Application area
The area of application must have sufficient
floor load capacity. Ask the responsible sales
representative about the relevant wheel loads
and specific floor loads for your industrial
truck. The floor must meet the guidelines
specified by us. The condition of the floor sur-
face influences the braking distance of the in-
dustrial truck. The driver must take account of
this in his driving and braking style.
The industrial trucks described here are de-
signed for the following application conditions
(VDI 2695 category 1):
●
Smooth, level roadways without major gra-
dients up to a maximum of 3%
●
normal work load, 50% capacity utilization;
full load and half shift or half load and full
shift.
Ambient temperature in accordance with EN
1175-1.
Series products in continuous operation are
designed for an average ambient temperature
range of +5°C to +25°C.
The maximum ambient temperature may in-
crease briefly (for up to one hour) to up to
+40°C.
Safety
2
Application area
18 5231 804 2502 EN - 04/2020
To Next Page
Loading...
