CAUTION
Functional impairment
– Observe the operating instructions provided by
the scanner manufacturer.
– Observe cleaning instructions.
– Do not adjust the scanner or cover the openings.
Personal protection system,
preparation
Preparation for immediate installation
With this option, industrial trucks are prepared
for installation of a personal protection system.
The customer will have already specified the
manufacturer of the MPSE. The brand-specific
cable harnesses and mechanical support
mountings will therefore be installed at the fac-
tory. The actual controller and sensor systems
must be completed at the customer's site in
time for commissioning. Until this point, the
driving speed is limited to 2.5 km/h. This limi-
tation is removed once the personal protection
system has been installed by the authorised
service centre.
CAUTION
Risk of accident
If the personal protection system is not fully installed
and commissioned, the "personal protection" and
"collision protection" functions are not enabled. In
this condition, the intended use of this industrial truck
is not possible or permissible.
Preparation for later installation
With this option, only the mechanical compo-
nents for installation of laser scanners are in-
cluded in the scope of delivery. The standard
interface in the X99 industrial truck for con-
necting a personal protection system is also
available. However, the functionality of the in-
dustrial truck corresponds to the standard ver-
sion.
Special equipment
7
Personal protection system, preparation
134 5231 804 2502 EN - 04/2020
To Next Page
Loading...
