Driving and auxiliary lift
In order to execute the two functions driving
and auxiliary lift simultaneously, both operat-
ing levers must be moved accordingly.
Press the button (10) to select the auxiliary lift.
The degree of activation is always infinitely
variable.
Driving, main lift and auxiliary lift
In order to execute the functions driving, main
lift lifting and auxiliary lift lifting, or driving,
main lift lowering and auxiliary lift lowering si-
multaneously, both operating levers must be
moved accordingly.
In addition, press the button (11) to select the
combination of main lift and auxiliary lift.
The degree of activation is always infinitely
variable.
Types of guidance
The industrial trucks can be designed for:
●
Driving without guidance
●
Driving with mechanical rail guidance*
●
Driving with inductive guidance*
●
And combinations* of these
*Option
Driving without guidance
In standard trucks, the operator's right hand
selects the driving speed and drive direction.
The operator's left hand is used for steering
and thus determines the course the truck
takes.
Mechanical rail guidance (MZF)*
The industrial trucks can be guided
mechani-
cally
when travelling within aisles. To achieve
this, a rail system is installed on the floor of
the warehouse. Two-hand operation is re-
quired to make use of the guidance system.
The operator's right hand selects the driving
speed and drive direction. The operator's left
hand is used to actuate a sensor or a function.
Operation
4
Driving
735231 804 2502 EN - 04/2020
To Next Page
Loading...
