Battery replacement with change frame
The industrial truck can be optionally equipped
with roller channels so that the battery can be
replaced using a crane or battery change
frame.
When using a battery change frame, observe
the corresponding operating instructions for
the change frame.
NOTE
If your industrial truck is equipped with roller
channels, the battery is secured in position
with a battery lock. Observe the information in
the section entitled
Battery lock
in particular.
WARNING
Risk of damage to property, risk of crushing
Observe the information in the section entitled
Safe
handling of the traction battery
.
Before starting each shift, check that the battery lock
is in good working order and that it functions correct-
ly.
Function checking
Before the truck is handed over to its destina-
tion, thorough function checking must be car-
ried out. Before starting work, the
Checklist
before starting work
must be completed.
If any defects that could influence operational
and road safety are determined during this
daily check, courses of action must be taken
immediately to ensure that appropriate repairs
are carried out. It is prohibited to continue op-
erating the industrial truck until the repairs
have been completed.
If your industrial truck is equipped with any
special equipment (order), this must also be
checked carefully. For a functional description
and any additional maintenance tasks re-
quired, see the chapter entitled
Special equip-
ment
or the additional documentation pre-
pared and provided by our suppliers.
Operation
4
General commissioning
58 5231 804 2502 EN - 04/2020
To Next Page
Loading...
