●
Do not subject to extreme atmospheric con-
ditions
●
The inspection and maintenance intervals
are shortened in volatile and very damp en-
vironments.
●
Do not subject to shear forces, e.g. shifting
of the load with the fork profile extended in
a longitudinal and lateral direction.
Maintenance of the telescopic table
NOTE
The information in the enclosed manufactur-
er's documents must be observed to ensure
proper maintenance of the telescopic table.
Other attachments
Other attachments* can also be supplied in
place of the turret head.
These include:
●
Telescopic tables
●
Accessible pallets
●
Order-picking platforms
●
Customised structures
DANGER
Impairment of operational safety, danger to the op-
erator
Other than the attachments supplied by the manufac-
turer, only attachments tested and supplied by the
manufacturer are permitted. Unauthorised modifica-
tions are prohibited. See also "Alterations to industri-
al trucks".
Just as is the case with the industrial truck, attach-
ments must be serviced regularly and inspected
once a year by a specialist.
Other attachments differ from the standard de-
sign in terms of the method of operation as
well as in the type of hazards if safety informa-
tion is not observed. It is therefore important
for the operator to be familiar with and to ad-
here to the instructions for the particular at-
tachment that is fitted.
Additional operating instructions and mainte-
nance instructions from our suppliers may also
apply.
Special equipment
7
Other attachments
150 5231 804 2502 EN - 04/2020
To Next Page
Loading...
