Swivel shift fork
The movements of the turret head are auto-
matically braked before the turret head rea-
ches its mechanical stop. The end positions
are signalled to the controller by switches. The
industrial truck drives at the maximum speed
approved for the lift height only if the turret
head is located in the right or left end position.
If either the swivel or reach movement does
not reach the end position, the industrial truck
drives only at positioning speed and the lifting
and lowering speed of the main lift is reduced.
The
tortoise
symbol appears in the display.
Once the turret head has reached one of the
two end positions, the operator is notified by
an acoustic signal.
Other attachments
Other attachments* can also be supplied in
place of the turret head.
These include:
●
Telescopic tables
●
Accessible pallets
●
Order-picking platforms
●
Customised structures
DANGER
Impairment of operational safety, danger to the op-
erator
Other than the attachments supplied by the manufac-
turer, only attachments tested and supplied by the
manufacturer are permitted. Unauthorised modifica-
tions are prohibited. See also "Alterations to industri-
al trucks".
Just as is the case with the industrial truck, attach-
ments must be serviced regularly and inspected
once a year by a specialist.
Other attachments differ from the standard de-
sign in terms of the method of operation as
well as in the type of hazards if safety informa-
tion is not observed. It is therefore important
for the operator to be familiar with and to ad-
here to the instructions for the particular at-
tachment that is fitted.
Overview
3
Swivel shift fork
415231 804 2502 EN - 04/2020
To Next Page
Loading...
