Parking, decommissioning
Parking and leaving the truck
NOTE
It is the operator's duty to remove the ignition
key when he leaves the truck, thus securing
the truck against unauthorised use. If the truck
is equipped with an electronic access control,
it must be reset and/or the device for control-
ling access must be removed. Where possi-
ble, the truck should be parked at the start of a
racking aisle or in a loading bay. If there are
parking spaces, the truck must be parked
there. The fork is to be lowered to the floor as
far as possible, and if there is one, the tilt at-
tachment must tilt towards the floor to reduce
the risk of stumbling.
Decommissioning
ENVIRONMENT NOTE
If the industrial truck described here has to be
taken out of operation, make sure that all com-
ponents are disposed of in accordance with
the valid guidelines. The used consumables in
particular are to be recycled or disposed of
correctly.
Operation
4
Parking, decommissioning
94 5231 804 2502 EN - 04/2020
To Next Page
Loading...
