made aware of the industrial truck and can re-
act in good time.
As the work procedures can vary in every stor-
age area, the need for acoustic signals also
varies. For this reason, they are configured
according to the customer's specifications.
CAUTION
Risk of accident
When employees become used to certain acoustic
signals, they will rely on them more and more. That
is why acoustic signals are considered part of the
safety systems and must always be in working order.
See the "Checklist before starting work".
Antistatic version
Various components can be installed to pre-
vent or minimise static charging of the industri-
al truck. The customer must ensure that the
floor covering and/or racking permit the dis-
charge of electrical charge.
These include:
●
Electrically conductive guide rollers for me-
chanical guidance
●
Electrically conductive elements for induc-
tive guidance (chains, brushes)
●
Electrically conductive load wheels
CAUTION
Danger of damage to property, loss of function
When replacing the elements for dissipating static
charge, use only elements that are electrically con-
ductive. We recommend using original parts.
Check the condition and functionality of the elements
each time maintenance is performed.
Special equipment
7
Antistatic version
148 5231 804 2502 EN - 04/2020
To Next Page
Loading...
