Two-person cab
Provided a driver's cab is equipped according-
ly, two people may be in it at the same time
during normal operation. The additional equip-
ment usually consists of:
●
Key switch to switch from one-person oper-
ation to two-person operation
●
Handholds
●
Additional foot switches
●
Lift ram protection against contact
●
Protection against leaning out
●
Other safety equipment may be available,
depending on the job.
CAUTION
Risk of accident
The additional safety equipment installed must not
be altered in any way. If safety equipment is defec-
tive or its function is impaired, the truck must not be
operated in ride on mode until it has been repaired
by a professional.
NOTE
If a truck is intended and equipped for normal
operation with two people (operator and pas-
senger), two abseil systems must also be kept
to hand in the driver's cab.
Operator and passenger
The dimensions of the operator's compart-
ment on our industrial trucks are designed in
accordance with standard DIN EN ISO 3411
and are accordingly constructed for both fe-
male and male operators. This standard also
stipulates ranges within which the operator's
body weight and dimensions should lie. EN
ISO 3411 specifies 114.1 kg for the maximum
body weight for a large operator.
Special equipment
7
Two-person cab
154 5231 804 2502 EN - 04/2020
To Next Page
Loading...
Need help?
General
