Wind deflector cab
The driver's cab is equipped with a removable
plastic panel on the load side. This panel must
be removed if the driver needs to abseil from
the cage in an emergency; see the section en-
titled "Emergency abseiling".
The driver's cab has plastic covers at the
sides with inspection windows. This side cover
features a zip (1) to enable entry. These cov-
ers can also be removed completely.
NOTE
The zip must be closed completely before re-
moving and fitting the side covers.
Removing the side covers
The side covers are held in position on the
long sides with Velcro strips (2) and on the top
in a keder rail (3). To remove, carefully loosen
the Velcro connection and then slide the cover
sideways out of the keder rail.
Fitting the side cover
To fit the side covers, follow the removal se-
quence in reverse order.
Cleaning
Clean plastic panels and plastic foils using on-
ly cleaners that are intended specifically for
this purpose and special cloths. Dirty and/or
scratched panels pose a safety risk.
Special equipment
7
Wind deflector cab
140 5231 804 2502 EN - 04/2020
To Next Page
Loading...
