Driver's cabs, special ver-
sions
Special versions of driver's cab are available
for special applications.
There are driver's cabs
●
With safety glass all around
below
the rail
height
●
With a windscreen made of safety glass or
plastic,
fitted
on the rail
●
With a foil wind deflector with
integrated
foil
panels, fitted on the rail above the barriers
●
With fixed plastic panels
all around
, fitted
on the rail
NOTE
Panels that are installed above the rail in the
load direction must either be removed or
pushed forward for the abseiling process. See
the section entitled "Emergency abseil sys-
tem". Zips and clamping screws that can be
opened by hand are used. Any panels that are
removed must be placed inside the cab.
Heating system
Driver's cabs can be equipped with a warm-air
heating system as an option.
Special equipment
7
Driver's cabs, special versions
1395231 804 2502 EN - 04/2020
To Next Page
Loading...
