Still MX-X - Optispeed Versions

Optispeed versions
"Optispeed" denotes the various versions of
the speed optimisation system. To make the
work processes more economical and reliable,
the industrial truck can be equipped in stages
with additional components. The result is a
considerable expansion of the range of func-
tions.
Version 3.0
Auxiliary equipment
●
Advanced software functions
This version represents the basic equipment
of the "Optispeed" speed optimisation system.
The "intelligent load capacity diagram" tells
the operator what load weight can be lifted to
what lift height.
Automatic side shift limitation improves the po-
sitioning of the loads on the rack.
Version 3.1
Auxiliary equipment
●
Load weight detection
●
Advanced software functions
The "intelligent load capacity diagram" shows
the operator dynamically how high the load
that is currently on the load fork may be lifted.
Automatic side shift limitation improves the po-
sitioning of the loads on the rack.
Version 3.3
Auxiliary equipment
●
Load weight measurement
●
Physical load detection
●
Advanced software functions
The "intelligent load capacity diagram" shows
the operator dynamically how high the load
that is currently on the load fork may be lifted.
If the limit values are exceeded, acoustic and
visual warnings are issued.
In addition, the driving and lifting functions can
be locked.
Special equipment
7
Optispeed versions
1115231 804 2502 EN - 04/2020