Automatic side shift limitation improves the po-
sitioning of the loads on the rack.
Version 3.4
Auxiliary equipment
●
Load weight measurement
●
Physical load detection
●
Advanced software functions
The "intelligent load capacity diagram" shows
the operator dynamically how high the load
that is currently on the load fork may be lifted.
If the limit values are exceeded, acoustic and
visual warnings are issued.
In addition, the driving and lifting functions can
be locked.
Automatic side shift limitation improves the po-
sitioning of the loads on the rack.
The load is stabilised as it is retrieved and
stored, with dynamic adaptation to the lift
height and the load weight. This enables sen-
sitive loads in particular to be positioned gen-
tly and precisely without jerking. These opera-
tor assistance functions accelerate work pro-
cesses in the storage area.
Version 4.0
Version 4.0 includes "iGo pilot navigation" fea-
tures. This extensive set of functions is descri-
bed in separate documentation.
Special equipment
7
Optispeed versions
112 5231 804 2502 EN - 04/2020
To Next Page
Loading...
