CAUTION
Risk of accident due to the foot switch getting stuck
(service brake).
If your industrial truck is fitted with auxiliary equip-
ment for handling small load carriers, only the origi-
nal containers may be used in it. Other containers
cannot be held correctly and may fall to the floor.
This can result in the foot pedal being applied contin-
uously and the industrial truck no longer responding
to this brake signal.
The support mountings and clamping devices must
always be in perfect condition so that the auxiliary
components can be operated safely and do not move
from their positions during travel.
USB charging station
This charging station can be used to charge
two consumers with USB charging cables at
the same time. Maximum charging power per
socket: 2 A.
NOTE
Protect against contamination and damage.
When the charging station is not in use, cover
the sockets with the hinged cover.
The support mounting also has space for hold-
ing drinks, pens and small items.
Special equipment
7
USB charging station
152 5231 804 2502 EN - 04/2020
To Next Page
Loading...
