Lift cut-out
The lifting operation is stopped at a previously
determined lift height. The ring around the en-
able button (1) lights up. This cut-out can be
overridden once the enable button has been
pressed. This equipment is therefore necessa-
ry if the truck is used in two (or three) build-
ings of different height, for example.
NOTE
As an option, this function can also be modi-
fied so that it is necessary to press and hold
the enable button in order to continue lifting.
Traction cut-out
The traction cut-out can be combined with the
intermediate lift cut-out. The ring around the
enable button (1) lights up when the traction
function has been cut out. This cut-out can be
overridden once the enable button has been
pressed.
NOTE
As an option, this function can also be modi-
fied so that it is necessary to press and hold
the enable button in order to continue driving.
The traction cut-out can also be implemented
in designated areas of the storage area re-
gardless of the lift height. However, this re-
quires additional sensor systems. See the or-
der for customer-specific details.
Aisle entry assistant
General
The aisle entry assistant can be used to make
it easier to drive into an aisle when using me-
chanical guidance. To do this, the truck re-
ceives electrical and mechanical equipment,
like a truck with inductive guidance.
A storage area in which the aisle entry assis-
tant is to be used is therefore fitted with a
Special equipment
7
Lift cut-out
120 5231 804 2502 EN - 04/2020
To Next Page
Loading...
