Lubricants
CAUTION
Danger of damage to property
Trucks for cold store operation must be lubricated
using different lubricants. Observe the operating in-
structions for cold-store trucks.
The following lubricants must be used:
Hydraulic system
●
Hydraulic oil
HLP DIN 51524/T2
●
Mat. no. 7327 400 112
The tanks are labelled with a min/max mark-
ing. After the hydraulic oil has been topped up
or changed, the oil level must be between the
min marking and the max marking.
The filling quantity depends on the configura-
tion of the industrial truck. Maximum tank size
93 l.
Gearbox
●
Castrol alphasyn EP150
●
Fuchs Renolin Unisyn CLP150
●
Mat. no. 7326 000 019 (200 l container)
●
Mat. no. 7326 000 029 (5 l container)
Filling quantities for gearbox
●
2.9 l (48 V version)
●
7.1 l (80 V version)
Grease lubrication points
●
Lithium soap grease multi-purpose grease
LITH-EP2
●
Mat. no. 7337 500 200
●
Mat. no. 0170761 (100 g tube)
Lubricant for load chains
●
Chain spray
Stabylan 2100
●
Mat. no. 8010100
Lubricant for the shaft-hub connection
●
Special grease
Klüberplex BEM 34-132
●
Mat. no. 7339 300 003
Regular care and maintenance
5
Lubricants
1055231 804 2502 EN - 04/2020
To Next Page
Loading...
