Maintenance
In contrast, maintenance work must be per-
formed only by appropriately trained person-
nel. Special tools and the current service soft-
ware are required. Therefore, these activities
are described only briefly in the maintenance
schedule.
Original parts
We recommend that you use only genuine
spare parts. More information and the order
numbers can be found in the spare parts list.
The installation of other parts will invalidate
the warranty.
Maintenance frequencies and times
The maintenance activities are scheduled at
intervals of 1000 hours or 12 months. You can
use the maintenance schedule to determine
what work is required. The following mainte-
nance schedules are based on 10,000 operat-
ing hours. Once this number of operating
hours is reached, the cycle starts again from
the beginning. The intervals must be reduced
for trucks exposed to high levels of dust and
significant temperature fluctuations. A check
of the function and condition of the truck must
be carried out during each maintenance oper-
ation.
Type of stress
This maintenance schedule is valid for normal
stress for single-shift operation not within a
cold store. For heavy-duty and/or multi-shift
operation, reduce the intervals. Note the infor-
mation in the section entitled
Area of applica-
tion
.
Regular care and maintenance
5
Regular care and maintenance
975231 804 2502 EN - 04/2020
To Next Page
Loading...
