It is therefore essential that the functionality
specified for the place of use is:
●
Included in the operating instructions appli-
cable for the storage area
●
Explained to the warehouse staff and
●
That the warehouse staff are made aware
that they must comply with the operating in-
structions
Switching on and off
The safety headlight is switched on when the
key switch of the industrial truck is switched
on.
If the industrial truck is switched off using the
key switch, the safety headlight goes out.
NOTE
There is an option available to have the safety
headlight switch on or off only in specific areas
of the warehouse or during specific work pro-
cesses. For a description of these special ca-
ses, see the order.
Safety
NOTE
The safety headlight features extremely pow-
erful LEDs. Briefly looking directly into the
beam of light does not present a danger to
health, but is unpleasant due to the temporary
dazzling effect. However, looking into the
beam of light for longer periods must be avoi-
ded.
Maintenance
Before starting work, the driver must check
whether the distance between the beam of
light and the truck is correct.
Clean the lens of the safety headlight if it is
contaminated. Apart from these measures, the
safety headlight is maintenance-free.
Special equipment
7
Safety Light safety headlight
146 5231 804 2502 EN - 04/2020
To Next Page
Loading...
