198 Sun Fire V890 Server Owner’s Guide • September 2004
serial ports, 70
memory, 51 to ??
PCI cards, 56 to 58
power supplies, 61, 63
removable media devices, 67
SCSI devices, 67
serial ports, 67
system controller card, 59
USB ports, 68
hardware jumpers, See jumpers
hardware redundancy, 3, 4, 5, 16, 17, 58, 79, 90, 91
hardware watchdog, enabling, 19
host name, 92, 94
hot spares, See disk configuration
hot-plug feature
definition, 127
disk drives, 3, 16, 79, 84, 127 to 130, 138
OK-to-Remove LED, 12, 143, 147, 148
PCI cards, 2, 16, 56, 58, 127 to 130
user interfaces, 130, 138
hot-swap feature
definition, 127
fan tray assemblies, 17, 127 to 130
power supplies, 17, 127 to 130
I
I/O board, 20, 60, 70 to 74, 81, 90, 130, 133
jumpers, 68, 70
PCI slot locations, 57
I/O bridge fan tray, See fan tray assemblies
I/O fan tray, See fan tray assemblies
I
2
C bus, 17
IDE
parity protection, 21
input-device configuration parameter, 43
input-device configuration variable, 45, 122
installing a server, 24
interleaving, memory, 53
internal disk drive bays, locating, 7, 85
Internet Protocol (IP) address, 92, 95
ISP2100 processor, 87
ISP2200A processor, 86, 87
J
jumpers, 69
FC-AL disk backplane, 74
flash PROM jumpers, 72
serial port jumpers, 70
K
key lock, 8
keyboard, attaching, 33
keyboard/mouse connector, location, 9
keyswitch
Diagnostics position, 36, 74
Forced Off position, 14, 38
effect on RSC, 14, 39
location, 7, 11
Locked position, 14, 74, 138
monitoring and control, 17
Normal position, 14, 36, 74
settings, 14
L
LEDs, See status LEDs
link integrity test, 93, 97
log files
error, 18
RSC, 20
luxadm utility, 129, 138
M
memory modules, 2, 51
banks of, 51
capacities, 2, 51
configuration guidelines, 51 to ??
handling, 54
memory interleaving, 53, 55
mirroring, disk, 21, 135
monitor, attaching, 33
motherboard, 3, 48, 64, 80, 86, 90, 130
motherboard fan tray, See fan tray assemblies
multipathing software, 3, 4, 79, 126, 130, 131
To Next Page
Loading...
