11-12 DF9.9/15 “K7” (’07) MODEL
CYLINDER HEAD, RECOIL STARTER ASSY AND TIMING BELT COVER
The cylinder head has been extended at the part of boss for the oil filler cap.
The recoil starter case has been changed in shape.
The timing belt cover and cover screw have been eliminated.
Recoil starter case
Timing belt cover
CAM SHAFT PULLEY BOLT
The length of cam shaft pulley bolt has been changed from 16 mm to 18 mm.
Boss
Oil filler cap
Boss
Oil filler cap
26.5 mm
21 mm
Screw
Timing belt cover
Eliminated
Cam shaft pulley bolt
16 mm 18 mm
To Next Page
Loading...
