Suzuki DF15 - Cylinder;Crankshaft Bearing

12-12 DF9.9T/TH “K8” (’08) MODEL
CYLINDER/CRANKSHAFT BEARING
The number of types of bearing holder inside diameter for the
crankcase has been reduced to one, as follows:
Because of that, engraving of the bore ID code has been abol-
ished.
Standard:
As the number of types of bearing holder inside diameter for the
crankcase has been reduced to one, the number of types of
crankshaft bearing has also been reduced to one as follows:
NOTE:
When the crankshaft bearing is replaced, the oil clearance
should be checked in the crankshaft journal.
Standard:
NOTE:
The above change applies also to 2008 Model DF9.9/15.
Code Crankcase bearing holder inside diameter
A 35.008 – 35.016 mm (1.3783 – 1.3786 in)
B 35.000 – 35.008 mm (1.3780 – 1.3783 in)
Code Crankcase bearing holder inside diameter
35.000 – 35.008 mm (1.3780 – 1.3783 in)
Code Crankshaft bearing thickness
Green 1.486 – 1.490 mm (0.0585 – 0.0587 in)
Black 1.490 – 1.494 mm (0.0587 – 0.0588 in)
Code Crankshaft bearing thickness
Green 1.486 – 1.490 mm (0.0585 – 0.0587 in)
ID code
Color mark