2-16 PERIODIC MAINTENANCE
ANODES AND BONDING WIRES
ANODES
If 2/3 of the anode has corroded away, replace the anode.
The anode should be periodically cleaned with a wire brush to
ensure maximum effectiveness.
NOTE:
The anode securing bolt should be covered with SUZUKI SILI-
CONE SEAL.
99000-31120: SUZUKI SILICONE SEAL
BONDING WIRES
If breakage or other damage is found on the wire, replace the
wire.
If rust, corrosion, or other damage is found on terminal, clean
with cleaning solvent or replace the wire.
Inspect every 50 hours (3 months).
Never paint the anode.
Anode
To Next Page
Loading...
