Suzuki DF15 - Steering and Bracket Assembly Service

MID UNIT 7-13
SWIVEL BRACKET, STEERING
BRACKET, CLAMP BRACKET
REMOVAL/DISASSEMBLY
1. Remove driveshaft housing/oil pan. (See page 7-7.)
2. Remove the two (2) bolts securing steering friction adjuster
plate a to the steering bracket. (Tiller handle model)
3. Remove steering adjuster bolt 1, cover 2, washer 3 and
spring 4.
4. Lift steering bracket 5 upward to remove from swivel
bracket.
Remove washer 6, upper bush 7 from swivel bracket.
5. Remove steering friction adjuster set 8. (Tiller handle
model)
6. Remove the washer 9, O-ring 0 and lower bush A.