4-4 FUEL SYSTEM
CARBURETOR
REMOVAL
1. Remove the STBD side cover. (See page 7-2.)
2. Remove the two (2) bolts securing carburetor.
3. Remove the silencer case 1, carburetor 2 and insulator 3.
4. Detach the fuel hose 4 from carburetor inlet.
Remove the throttle rod 5 from carburetor.
5. On tiller handle model:
Unscrew the starter cable lock nut 6, then remove starter
cable with starter plunger 7.
Before servicing the fuel system, read and understand
“PRECAUTION ON FUEL SYSTEM SERVICE” in the
previous section.
To Next Page
Loading...
