Suzuki LT-Z400 2003 - Page 61

• Remove the neutral switch <D.
• Remove the a-ring ~ , switch contacts ~ and springs @.
• Remove the left crankcase securing bolts.
•
Remove the right crankcase securing bolts.
• Separate the crankcase using the special tool.
dEl 09920-13120: Crankcase separating tool
NOTE:
Fit the crankcase separating tool to the right crankcase, so that
the tool plate is paraffefed with the
end face of the crankcase.
• Remove the dowel pin @.
• Remove t he gearshift fork shaft @. reverse lock shaft (J) ,
gearshift forks @ and gearshift cam @.
EN GI NE 3- 11