Suzuki LT-Z400 2003 - Page 89

OIL SEAL INSTALLATION
• Install the oil seals into the crankcase. Pay attention to the fol·
lowing points :
• Apply SUZUKI SUPER GREASE "A" 10 Ihe lip of the oil seals .
.0 99000·25030: SUZUKI SUPER GREASE " A" (USA)
99000·25010: SUZUKI SUPER GREASE " A"
(Olhers)
• I nstall the new oil seals u sing the special 1001.
Iiib 09913-70210: Bearing Installer set
CLUTCH RELEASE
CAMSHAFT
• Remove the clutch re lease camshaft.
(j) Clutch release camshaft
<2> Bearing
@ Washer
@
Oilsea l
• Install the clutch release camshaft correctly .
ENGINE 3-45