5-20 COOLING AND LUBRICATION SYSTEM
• Install the new O-ring to the water pump cover.
!
• Apply engine coolant to the O-ring.
• Install the water pump cover to the clutch cover.
• Install the clutch cover. (%3-55)
• Install the master cylinder mounting bolts.
) Master cylinder mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Connect the rear brake switch spring and brake pedal spring
as to lower side.
• Connect the radiator hose.
• Pour engine oil. (%2-12)
• Pour engine coolant. (%2-14)
Use the new O-rings to prevent engine coolant leak-
age.
To Next Page
Loading...
