Suzuki LT-Z400 - Page 182

CHASSIS 6-35
• Install the wishbone arms to the steering knuckle and tighten
the knuckle end nuts to the specified torque.
# Knuckle end nut: 43 N·m (4.3 kgf-m, 31.0 lb-ft)
• Install the cotter pins.
%
• Tighten the wishbone arm pivot nuts to the specified torque.
# Wishbone arm pivot nut: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
• Install the front grip
9 and the front shock absorber.
• Apply THREAD LOCK SUPER “1303” or “1322” to the front
shock absorber mounting bolts.
- 99000-32030: THREAD LOCK SUPER “1303” (USA)
$ 99000-32110: THREAD LOCK SUPER “1322” (Others)
• Tighten the shock absorber mounting nut to the specified
torque.
# Shock absorber mounting nut (Upper and Lower):
60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Apply THREAD LOCK SUPER “1360” to the disc cover
mounting bolts, and then tighten the bolts.
, 99000-32130: THREAD LOCK SUPER “1360”
Replace the removed cotter pins with new ones.