ENGINE 3-45
OIL SEAL INSTALLATION
• Install the oil seals into the crankcase. Pay attention to the fol-
lowing points:
• Apply SUZUKI SUPER GREASE “A” to the lip of the oil seals.
) 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the new oil seals using the special tool.
& 09913-70210: Bearing installer set
CLUTCH RELEASE CAMSHAFT
• Remove the clutch release camshaft.
1 Clutch release camshaft
2 Bearing
3 Washer
4 Oil seal
• Install the clutch release camshaft correctly.
To Next Page
Loading...
