3-44 ENGINE
BEARING INSTALLATION
• Install the crankcase bearings using the special tool.
& 09913-70210: Bearing installer set
• Apply a small quantity of THREAD LOCK SUPER “1303” to
the bearing retainer screws, and tighten them securely.
$ 99000-32030: THREAD LOCK SUPER “1303”
OIL SEAL INSPECTION
Damage to the lip of the oil seal may result in leakage of the
engine oil. Inspect the oil seal for wear or damage. If any dam-
ages are found, replace the oil seal with a new one.
OIL SEAL REMOVAL
• Remove the oil seal retainer.
• Remove the oil seals.
"
Replace the removed oil seals with new ones.
To Next Page
Loading...
