18. ELECTRICAL SYSTEM
18-13
Light / Bulb
Headlight bulb replacement
Remove 2 screws for the headlight cover, and
remove the cover.
Remove the rubber boot.
Press the bulb setting hook.
Remove the bulb connector and the bulb.
Replace with new bulb if necessary.
(H7 12V 35W)
Caution
Never touch the bulb with finger, which will
create a heat point and reduce the lifetime of
the bulb.
Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
To this chapter contents
Rubber boot
2 screws
Adjusting screw
2 screws
Hook
To Next Page
Loading...
