Technogym Run Excite 700 - Enable TGS; Enable Keyboard

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Page 9.4
9.1.8. ENABLE TGS
t is possible to enable or disable the use of r. To change the selection, when the LED
TGS: xxx
I
m
the TGS reade
atrix shows the current setting:
Press the +/- GOAL keys to select the desired option from those listed in the table below:
TGS
ENAB lt> LED <defau
DISABLED
Press ENTER to confirm the selection, use the + or – speed keys to move to the next or preceding
parameter.
9.1.9. ENABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the setting, when the LED matrix shows the current one:
KEYS: xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
K EYS
ENABLED <default>
DISABLED
Press ENTER to confirm the selection, use the + or – speed keys to move to the next or preceding
parameter.
9.1.10. ENABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the LED matrix shows the current setting:
CUSTOM MESS. : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
CUSTOM MESS.
YES <default>
NO
Press ENTER to confirm the selection, use the + or – speed keys to move to the next or preceding
parameter.