Technogym Run Excite 700 - Time and Date

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Page 9.14
• Configurazione
TECHNICAL
CONFIGURATION
OPERATING
DATA
TIME AND STANDARD
SETTINGSDATE
LOW KIT LOW KIT
PARAM.
UPDOWN
SETTINGS
HIGH KIT
VERSION
MENU
TV STANDARD
(
sol o Wel l ness T V )
MAINS
VOLTAGE
ERRORS LOG
croll through the parameter list using the + or – speed keys to move the next or previous
parameter.
e CLEAR key to erase the current value and then use the number keys
to enter the desired new value. Save the changes made by pressing the ENTER key.
or a few seconds.
us parameters are described below.
IME AND DATE
This function sets the internal clock of the lower assembly. s this m
display shows:
NTER follows:
S
To modify a parameter value, it is necessary to press the ENTER key: when the current parameter
alue starts to blink, press thv
To cancel the operation, press the CLEAR key f
The vario
9.3.1. T
To acces enu, when the LED
TIME AND DATE
press E . This function is structured as